REQUIRED TOOLS

drill ladder saw Leveler Silicone gun

ASSEMBLY CONTENTS

*Note : If you ordered more than 1000 models, you will receive additional spare parts.

VIEW MODEL
Model AL-Front Fixing Bar(∅) AL-Support Bar(∅) AL-Rear Fixing Bar(mm) PC-Sheet(mm) PC-Edge Cover(mm) PVC Cap(∅) Support Pipe(mm)
PC 350 30 - 55 315 300 x 2ea 30 x 2ea
PC 450 30 - 55 407 350 x 2ea 30 x 2ea
PC 550 30 19 55 500 440 x 2ea 30 x 2ea
19 x 2ea
PC 650 38 19 55 610 550 x 2ea 38 x 2ea
19 x 2ea
20 x 40
PC 800
(One-touch)
38(One-touch type) 19 55 760 705 x 2ea 38 x 2ea
19 x 2ea
30 x 50
PC 1000
(One-touch)
38(One-touch type) 19 55 955 900 x 2ea 38 x 2ea
19 x 2ea
30 x 50
PC 1000 38 19 55 955 900 x 2ea 38 x 2ea
19 x 2ea
30 x 50
PC 1270 38 19 x 2ea 55 1220 1165 x 2ea 38 x 2ea
19 x 4ea
50 x 50
PC 1500 38 19 x 2ea 55 1505 1455 x 2ea 38 x 2ea
19 x 4ea
50/70
PC 1870 50 25 x 3ea 55 1810 1735 x 2ea 50 x 2ea
25 x 6ea
50 x 70
  • PC Bracket

    PC Bracket
    Material: Polycarbonate

  • Front Fixing Bar

    Front Fixing Bar

  • Support Bar

    Support Bar

  • Rear Fixing Bar

    Rear Fixing Bar

  • Polycarbonate Sheet

    Polycarbonate Sheet

  • Gasket Edge Cover

    Edge Cover(Gasket)

  • 19 PVC Cap, 38 PVC Cap

    19 PVC Cap, 38 PVC Cap

  • 6-40 Hexagon bold, 3/8x120 Anchor
  • 6mm nut 6-20screw, 6-25screw
  • extension

How to use Anchor Bolt

Attention:
You are solely responsible for the decision regarding handling, storage, assembly and installation of the product. Korea Hot Fix Co. is not responsible for damage to property or personal injury caused by improper handling, storage, installation, assembly or use of the product or failure to follow the instructions in connection therewith. This product is intended for general residential use only. Do not apply the product where this manual or the building where the product will be installed does not recommend.
Always be careful when assembling or installing the product and use suitable safety equipment (including safety goggles).

Installation

1. Fix brackets with anchors

2. Push in the base clip frame (rear fixing bar) completely

3. Mark the part to be cut with a pen on the base clip frame

4. Cut the marked part with a saw
Peel off the marked part

5. Insert the base clip frame by pushing it all the way to the wall

6. Insert two structure bars (front fixing bar and middle support bar)

7. Insert the polycarbonate sheet

8. Fix the upper part of the bracket

9. Before fixing the bracket using bolts, check the assembly condition such as
whether the polycarbonate sheet and the bar are properly inserted and aligned!

10. Insert the finishing material (edge cover) to complete the installation.

VIDEO

canofix Installation